2
Avaya X330G2 Expansion Module Installation Guide
Usage Restriction
When a GBIC transceiver is inserted in the X330G2 Expansion sub-module but is not
in use, then the Tx and Rx ports should be protected with an optical connector or a
dust plug.
Avaya Approved GBIC Transceivers
Caution:
All Avaya appoved GBICs are 5V. Do not insert a 3.3V GBIC.
Avaya supplies the following two GBIC transceivers for the Avaya P330 X330G2
Expansion Sub-modules. You can order these directly from your local Avaya
representative using the PEC or COM Codes:
Note:
The ELX transceiver is for the Avaya P330 only.
In addition, Avaya has tested and approved a number of GBIC transceivers from
other manufacturers for use with the Avaya X330G2 Expansion sub-module. An up-
to-date list can be found in Avaya Networks’ World-Wide Web site at the following
address:
http://www.avayanetwork.com/
Click on the “Supported Devices” icon.
Installation
Installing the Expansion Module in the Avaya P330
1
Remove the blanking plate or other module (if installed) from the Avaya P330
Expansion slot.
2
Insert the Expansion Sub-module gently in the slot, ensuring that the board is
aligned with the rails.
Type
Description
PEC Code
COM Code
GBIC SX
Transceiver
Multimode Fiber
1000Base-SX (550 m)
4705-122
108659228
GBIC LX
Transceiver
Single-mode Fiber
1000Base-LX (10 km)
4705-121
108659210
GBIC ELX
Transceiver
Single-mode Fiber Long
Range GBIC (80 km)
(same as P880)
4589-810
700013147