Avaya WLAN Series, Руководство по установке, Страница: 57 / 110

The Antenna Cabling System
Avaya Wireless Surge Arrester
Avaya Outdoor Antenna Installation Guide A-5
Avaya Wireless Surge Arrester
The ”Avaya Wireless Surge Arrester” (sometimes also referred to as “Lightning
Protector”) can protect your sensitive Avaya Wireless equipment from high-
voltage surges caused by discharge and transients at the antennas.
Figure A-1 Mounting the Avaya Wireless Surge Arrester
To mount the Avaya Wireless Surge Arrester:
1. Determine a suitable location for the bracket (item B) as described in
Chapter 2 “Preparing for Installation”.
2. Use the screws (item C) to attach the bracket the wall.
3. Apply a ring-terminal to the ground wire, and use the bolt, lock-washer and
nut (item D) to connect the ground-wire (item E) to the mounting bracket.
The ring-terminal and ground wire are not included, but must be installed by
a certified electrician that is familiar with national electricity & safety codes,
according the instructions described under “Grounding System” on
page 2-13
4. Next insert the Avaya Wireless Surge Arrester (item A” into the bracket as
pictured in Figure A-1.
5. Use the hex-nut (item F) to secure the Avaya Wireless Surge Arrester in its
position, and ensure that the Protector is properly connected to the
grounding system.