Avaya WLAN 8100 Series, Справочник, Страница: 336 / 382

Removing interface action extension entries
About this task
Use the following procedure to remove interface action extension entries.
Procedure
Remove interface action extension entries by using the following command from
Global Configuration mode.
no qos if-action-extension <1-55000>
Configuring QoS Meters
The following sections describe the CLI commands to set the meters, to meter or police traffic,
configure the committed rate, burst rate, and burst duration.
Related topics:
Creating QoS meter entries on page 336
Removing QoS meter entries on page 337
Creating QoS meter entries
About this task
Use the following procedure to create QoS meter entries.
Procedure
Create QoS meter entries by using the following command from Global Configuration
mode.
qos meter <1-55000> [name <WORD>] committed-rate <64-10230000>
{burst-size <burst-size> max-burst-rate <64-4294967295> [max-
burst-duration <1-4294967295>]} {in-profile-action <1-55000> |
in-profile-action-name <WORD>} {out-profile-action <1,9-55000>
| out-profile-action-name <WORD>}
Variable Definitions
Variable Value
<1-55000> Specifies the QoS meter; range is 1–55000.
name <WORD> Specifies name for meter; maximum is 16
alphanumeric characters.
committed-rate <64-10230000> Specifies rate that traffic must not exceed for extended
periods to be considered in-profile. Enter the rate in
ACLI Reference for wired networks
336 Avaya WLAN 8100 CLI Reference August 2013
Comments? infodev@avaya.com