manualshive.com logo in svg

Avaya WLAN 8100 Series, Справочник, Страница: 112 / 382

Поделиться
Скачать
Avaya WLAN 8100 Series Скачать руководство пользователя страница 112

If the MAC address is configured on the black list or not configured in either list, access
is denied.

•

Validating against a remote RADIUS server

:

For improved scalability, client MAC authentication against a RADIUS server is now
supported. In this method of authentication, the MAC address of a mobile client device is
verified against a remote database interfaced by a RADIUS server.

This mode of authentication is useful in the validation of wireless devices that do not
support the 802.1X or the WPA authentication methods. It is also useful in enterprise
networks that support the Bring Your Own Device (BYOD) policy, personally-owned
devices, IT-issued devices and guests.

For more information, see the 

Avaya WLAN 8100 Fundamentals

 (NN47251–102).

Related topics:

Configuring the client MAC validation mode in a network profile

 on page 112

Configuring and verifying blacklists and whitelists

 on page 114

Validating client MAC addresses against a RADIUS server

 on page 115

Configuring the client MAC validation mode in a network profile

Use this procedure to configure the client MAC validation mode (the mode of client
authentication using client MAC addresses) in a network profile.

The supported client MAC validation modes are:

• validation against a local whitelist

• validation against a remote RADIUS server

Procedure

1. Enter the wireless configuration mode of the ACLI.

WCP8180#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

WCP8180(config)#wireless

WCP8180(config-wireless)#

2. Configure the MAC validation mode on the network profile.

WC8180(config-network-profile)#mac-validation mode ?

  local-whitelist  Set mac-validation to local-whitelist.

  radius           Set mac-validation mode to radius.

 Note:

The command 

WCP8180(config-network-profile)#mac-validation

<enter>

 is not supported in the current release.

ACLI reference for Wireless LAN (WLAN) 8100

112     Avaya WLAN 8100 CLI Reference

August 2013

Comments? [email protected]

Содержание WLAN 8100 Series































































































































































































































































































































































































Отзывы:

Нет отзывов