Avaya W310, Справочник по командам

Страница: 294 / 440

Chapter 11 W310 Port Commands
278 Avaya W310 Command Reference Guide
set port powerinline priority
User level: privileged, supervisor.
Use the
set port powerinline priority
command to configure the priority for
powering the port. Possible values are Critical, High, and Low. At power on, all ports are set
to Low Priority.
Within each group, the lowest port number has the highest priority. For example, within
ports 1 to 8, port 1 has the highest priority although its priority is lower than port 9 which
belongs to High priority group.
Syntax:
The syntax for this command is:
set port powerinline priority <module/port> {low | high |
critical}
Example:
Syntax Description
<module/port> 1/port number or range of port numbers. To specify a range of
ports, use a hyphen between the two port numbers. For example:
•
To specify port 1, type 1/1
• To specify ports 1 to 5, type 1/1-5
{low | high |
critical} Priority for powering the port or port range.
W310-1# set port powerinline priority 1/3 High
Powering priority on port/s 1/3 was set to High