manualshive.com logo in svg

Avaya Session Border Controller for Enterprise, Руководство пользователя, Страница: 52 / 78

Поделиться
Скачать
Avaya Session Border Controller for Enterprise Скачать руководство пользователя страница 52

g. Type 

cp -rf /tmp/mpoint/etc/udev/rules.d/99_ifrename.rules

.

h. Type 

/tmp/mpoint/etc/99_ifrename.rules.back

.

i. Type 

./ifnamer.py > /tmp/mpoint/etc/udev/rules.d/

99_ifrename.rules

.

j. Type 

umount /tmp/mpoint

.

k. Type 

mount /dev/sda11 /tmp/mpoint

.

l. Type 

cp -rf /tmp/mpoint/ipcs/icu/scripts/ifnamer.py

.

m. Type 

/tmp/mpoint/ipcs/icu/scripts/ifnamer.py.old

.

n. Type 

cp -rf ./ifnamer.py /tmp/mpoint/ipcs/icu/scripts/ifnamer.py

.

o. Type 

chmod +x /tmp/mpoint/ipcs/icu/scripts/ifnamer.py

.

p. Type 

umount /tmp/mpoint

.

q. Restart or shut down the server and remove the USB device.

r. Restart the server.

Avaya SBCE installation

Avaya ships the Avaya SBCE servers preinstalled with the software. In this case, performing a fresh
install is not required.

To re-install Avaya SBCE, perform the steps in 

Installing SBCE software

 on page 52.

Warning:

Performing installation will erase all existing data from the server.

Installing Avaya SBCE software from a USB or DVD

About this task

Use these steps to perform software installation on the system. All existing data on the disk will get

overwritten.

This procedure can be performed using either a DVD or a USB storage device. You can use the

serial console mode or VGA console mode to perform this task.

Procedure

1. Perform one of the following actions:

• To use a USB device for installation, insert the USB device in the USB port.

• To use a DVD for installation, connect the external DVD device to the USB port.

2. Reboot the server, and ensure that the boot device is DVD or USB. For information about

booting servers, see 

Booting servers with a USB flash device

.

Installation

52

     Deploying Avaya SBCE

August 2015

Comments on this document? [email protected]

Содержание Session Border Controller for Enterprise















































































Отзывы:

Нет отзывов