Avaya S8700-Series, Установка и настройка

Страница: 73 / 122

Issue 8 May 2009 73
Chapter 7: Postinstallation administration
This section covers the following tasks:
l
Verifying translations on page 73
l
Setting rules for daylight savings time on page 74
l
Setting locations (if necessary) on page 75
l
Verifying the date and the time (main server only) on page 76
l
Clearing and resolving alarms on page 77
l
Enabling and disabling the Ethernet switch ports on page 77
l
Backing up files to the compact flash media on page 80
l
Enabling alarms to INADS by way of a modem on page 79
l
Enabling alarms to INADS by way of the SNMP module on page 80
l
Before leaving the site on page 81
Verifying translations
1. Open a SAT session on the server.
2. To view all the administered circuit packs in the system, type
list configuration all
and press Enter .
3. To verify the location of the IPSI circuit packs
,
type
list ipserver-interface
and
press Enter .
For more information, see your planning documents and check the administration status on the
following items:
l
list station
l
list trunk-group
l
list hunt-group