Avaya S8400, Установка и настройка, Страница: 37 / 80

Installing and Configuring the Avaya S8400 Media Server February 2007
37
Chapter 5: IP interface translations
To administer SIPI circuit packs, use a terminal emulation program to issue Communication
Manager SAT commands.
For Communication Manager terminal emulation, use a program such as Avaya Native
Configuration Manager, Avaya Terminal Emulation, or HyperTerminal.
You also can use Avaya Site Administration to issue SAT commands. To administer some of the
features in the latest release of Avaya Communication Manager, you must use the latest
version of Avaya Site Administration.
Perform these tasks to administer SIPI circuit packs:
●
Inputting initial system translations on page 37
●
Adding media gateways on page 38
●
Enabling the SIPI on page 39
●
Adding the SIPI to the system on page 39
●
Setting the alarm activation level on page 40
●
Saving translations on page 40
Inputting initial system translations
1. Open a SAT session. See Using the SAT command line prompt on page 69.
2. Enter translations:
If the system translations were prepared offsite, enter the translations and reset the media
server.
If the translations are not available, enter minimal translations to verify connectivity to the
port networks.
3. After you enter the translations, type
save translation
and press Enter to save the
translations to the hard disk drive.
4. Type
reset system 4
and press Enter to have the software read the copied
translations.