background image

Copyright 2005, Avaya Inc.
All Rights Reserved

Notice

Every effort was made to ensure that the information in this document 
was complete and accurate at the time of printing. However, information 
is subject to change.

Warranty

Avaya Inc. provides a limited warranty on this product. Refer to your 
sales agreement to establish the terms of the limited warranty. In 
addition, Avaya’s standard warranty language as well as information 
regarding support for this product, while under warranty, is available 
through the following Web site

http://www.avaya.com/support

.

Preventing Toll Fraud

"Toll fraud" is the unauthorized use of your telecommunications system 
by an unauthorized party (for example, a person who is not a corporate 
employee, agent, subcontractor, or is not working on your company's 
behalf). Be aware that there may be a risk of toll fraud associated with 
your system and that, if toll fraud occurs, it can result in substantial 
additional charges for your telecommunications services.

Avaya Fraud Intervention

If you suspect that you are being victimized by toll fraud and you need 
technical assistance or support, in the United States and Canada, call the 
Technical Service Center's Toll Fraud Intervention Hotline at
1-800-643-2353.

Disclaimer

Avaya is not responsible for any modifications, additions or deletions to 
the original published version of this documentation unless such 
modifications, additions or deletions were performed by Avaya. Customer 
and/or End User agree to indemnify and hold harmless Avaya, Avaya's 
agents, servants and employees against all claims, lawsuits, demands 
and judgments arising out of, or in connection with, subsequent 
modifications, additions or deletions to this documentation to the extent 
made by the Customer or End User.

How to Get Help

For additional support telephone numbers, go to the Avaya support Web 
site: 

http://www.avaya.com/support

. If you are:

Within the United States, click the Escalation Contacts link 
that is located under the Support Tools heading. Then click 
the appropriate link for the type of support that you need.

Outside the United States, click the Escalation Contacts link 
that is located under the Support Tools heading. Then click 
the International Services link that includes telephone 
numbers for the international Centers of Excellence.

Providing Telecommunications Security

Telecommunications security (of voice, data, and/or video 
communications) is the prevention of any type of intrusion to (that is, 
either unauthorized or malicious access to or use of) your company's 
telecommunications equipment by some party.

Your company's "telecommunications equipment" includes both this 
Avaya product and any other voice/data/video equipment that could be 
accessed via this Avaya product (that is, "networked equipment").

An "outside party" is anyone who is not a corporate employee, agent, 
subcontractor, or is not working on your company's behalf. Whereas, a 
"malicious party" is anyone (including someone who may be otherwise 
authorized) who accesses your telecommunications equipment with 
either malicious or mischievous intent.

Such intrusions may be either to/through synchronous (time-multiplexed 
and/or circuit-based), or asynchronous (character-, message-, or 
packet-based) equipment, or interfaces for reasons of:

Utilization (of capabilities special to the accessed equipment)

Theft (such as, of intellectual property, financial assets, or toll 
facility access)

Eavesdropping (privacy invasions to humans)

Mischief (troubling, but apparently innocuous, tampering)

Harm (such as harmful tampering, data loss or alteration, 
regardless of motive or intent)

Be aware that there may be a risk of unauthorized intrusions associated 
with your system and/or its networked equipment. Also realize that, if 
such an intrusion should occur, it could result in a variety of losses to your 
company (including but not limited to, human/data privacy, intellectual 
property, material assets, financial resources, labor costs, and/or legal 
costs).

Responsibility for Your Company’s Telecommunications Security

The final responsibility for securing both this system and its networked 
equipment rests with you - Avaya’s customer system administrator, your 
telecommunications peers, and your managers. Base the fulfillment of 
your responsibility on acquired knowledge and resources from a variety 
of sources including but not limited to:

Installation documents

System administration documents

Security documents

Hardware-/software-based security tools

Shared information between you and your peers

Telecommunications security experts

To prevent intrusions to your telecommunications equipment, you and 
your peers should carefully program and configure:

Your Avaya-provided telecommunications systems and their 
interfaces

Your Avaya-provided software applications, as well as their 
underlying hardware/software platforms and interfaces

Any other equipment networked to your Avaya products

TCP/IP Facilities

Customers may experience differences in product performance, reliability 
and security depending upon network configurations/design and 
topologies, even when the product performs as warranted.

Standards Compliance

Avaya Inc. is not responsible for any radio or television interference 
caused by unauthorized modifications of this equipment or the 
substitution or attachment of connecting cables and equipment other 
than those specified by Avaya Inc. The correction of interference caused 
by such unauthorized modifications, substitution or attachment will be the 
responsibility of the user. Pursuant to Part 15 of the Federal 
Communications Commission (FCC) Rules, the user is cautioned that 
changes or modifications not expressly approved by Avaya Inc. could 
void the user’s authority to operate this equipment.

Product Safety Standards

This product complies with and conforms to the following international 
Product Safety standards as applicable:

Safety of Information Technology Equipment, IEC 60950, 3rd Edition, or 
IEC 60950-1, 1st Edition, including all relevant national deviations as 
listed in Compliance with IEC for Electrical Equipment (IECEE) CB-96A.

Safety of Information Technology Equipment, CAN/CSA-C22.2
No. 60950-00 / UL 60950, 3rd Edition, or CAN/CSA-C22.2 No. 
60950-1-03 / UL 60950-1.

Safety Requirements for Information Technology Equipment, AS/NZS 
60950:2000.

One or more of the following Mexican national standards, as applicable: 
NOM 001 SCFI 1993, NOM SCFI 016 1993, NOM 019 SCFI 1998.

The equipment described in this document may contain Class 1 LASER 
Device(s). These devices comply with the following standards:

EN 60825-1, Edition 1.1, 1998-01

21 CFR 1040.10 and CFR 1040.11.

The LASER devices used in Avaya equipment typically operate within the 
following parameters:

Luokan 1 Laserlaite

Klass 1 Laser Apparat

Use of controls or adjustments or performance of procedures other than 
those specified herein may result in hazardous radiation exposures. 
Contact your Avaya representative for more laser product information.

Typical Center Wavelength

Maximum Output Power

830 nm - 860 nm

-1.5 dBm

1270 nm - 1360 nm

-3.0 dBm

1540 nm - 1570 nm

5.0 dBm

Содержание S8300 Series









































































Отзывы: