Avaya S8100 Series, Пособия для модернизации, Страница: 10 / 26

Using a CD to upgrade an S8100’s software from R10 or later
Upgrade steps
10 Upgrade Job Aids for S8100
November 2003
26
SDT
– On the S8100’s desktop, double-click
the time display and set the time, time zone,
date, and Daylight Savings.
The time display is in the tool tray at the lower right of the
desktop.
27
SDT
– Disable modem compression. a Click Start
→
Settings
→
Control Panel.
b Double-click Phone and Modem Options.
c Click the Modems tab.
d Select the installed modem and click Properties.
e Click the Advanced tab.
f Click Change the Default Preferences.
g In the Compression drop-down list, select
Disabled.
h Close each dialog by clicking OK , and close the
Control Panel window.
28 SDT – Open a bash shell window. Click Start
→
Run
→
bash .
29 BS – Verify the software’s version. Type swversion . Ensure that the Release number and
MultiVantage version number are as expected.
30 BS – Verify the customer’s parameters that
you wrote down in Step 15 , using the setip
command.
Type setip to display the customer’s parameters. If any
parameter is not as you recorded in Step 15, use the
following setip commands to reset those parameters.
setip name=<args>
setip cust=<args>
setip dns=<args>
setip wins=<args>
setip ras=<args>
Replace each “<args>” with the corresponding parameter
you recorded in
Step 15 .
31 BS – Administer the product ID and OSS
parameters using the ‘productid’ and ‘oss’
commands.
productid multivantage-product-id <arg>
productid audix-product-id <arg>
oss <telno> <retries> <retry_interval>
Replace each “<arg>” with the corresponding parameter
you recorded from
Step 15 . For the
oss
command, enter
the
<telno>
,
<retries>
, and
<retry_interval>
parameters separated by spaces; do not enter commas.
32
BS
– Open a LAC window. Execute
telnet 127.1
, and log on using lucent3.
33
LAC
– Open a bash shell window. Type
bash
.
34
BS
– Check license status.
If
License-Normal Mode
is displayed,
skip Step 35 .
Type
statuslicense
.
35 LAC – Install the new license and password
file from the LAC window using the lucent3
log-in ID.
For details, see Chapter 3 in Installation and Upgrades for
the Avaya S8100 Media Server with the Avaya G600 and
the Avaya CMC1 Media Gateways, 555-233-146.
Step Details