•
on page 25
•
Creating a virtual route (LD 16)
on page 27
•
Creating virtual trunks (LD 14)
•
on page 29
•
Checking codec and QoS settings
on page 29
•
Creating the HMS 400 pilot number
on page 30
•
on page 31
•
on page 32
•
Configuring PMSI login with UCM on Security Domain
•
on page 34
•
Checking LDN0
About this task
Determine if LDN0 is defined or not defined on the Call Server. LDN0 is used as an attendant
DN.
Procedure
1. At a command prompt on the Call Server, type
LD 21
and press
Enter
.
2. At the
REQ
prompt, type
PRT
and press
Enter
.
3. At the
TYPE
prompt, type
ldn_data
and press
Enter
.
4. At the
CUST
prompt, type the customer number and press
Enter
.
5. Check that LDN0 is defined.
Defining LDN0
About this task
Define LDN0 on the Call Server.
Procedure
1. At a command prompt on the Call Server, type
LD 15
and press
Enter
.
Checking LDN0
Avaya Hospitality Messaging Server 400 Installation and Commissioning
March 2012 21