Avaya programming and use Скачать руководство пользователя страница 369 | Manualshive

Страница: 369 / 468

Avaya programming and use Скачать руководство пользователя страница 369

Upgrading the System

Using a PC Card

10-3

1.

If you have a 5-slot carrier, move the carrier’s On/Off switch to the “Off” position (“O”). See

Figure 10-1. On/Off Switch on a 5-Slot Carrier

2.

For all types of installations, disconnect the power cord from the wall outlet.

3.

If you do not have a 5-slot carrier, go to Step 4.

If you have a 5-slot carrier and a system of Release 4.0 or later:

a.

Loosen the thumb screw at the bottom of the carrier cover.

b.

Rotate the carrier cover to disengage the tabs at the top of the modules from the openings
on the top of the carrier.

If you have a 5-slot carrier and a system of Release 3.0 or earlier:

a.

Loosen the screw on the lower front of the cover.

b.

Place one hand on the handle on the bottom front of the cover and place your other hand
on the top of the cover, and gently pull the cover up and away from the carrier. Be careful
not to break the tabs that attach the cover to the carrier.

CAUTION:

Remove all other PC Cards from the processor before initiating an upgrade.

PARTNER

3000

PARTNER

3000

PARTNER

3000

PARTNER

3000

PARTNER

3000

On/Off Switch

«
...
367
368
369
370
371
...
»

Содержание programming and use





















































































































































































































































































































































































































































































Отзывы:

Нет отзывов