Avaya Partner 308EC Скачать руководство пользователя страница 4

Using a 5-Slot Carrier–continued 

Check the green lights on the fronts of the 
modules:

A)

 If a single light is out, power down the 

carrier, reseat the module, then power up the 
carrier.

B)

 If multiple green lights are out, power 

down the carrier, reseat the leftmost module 
that has a light out, then power up the carrier.

C)

 If the lights are still out, contact your local 

Authorized Dealer or, in the Continental U.S. 
only, or you may also call the hotline.

L

I

N

E

S

PFT

L

I

N

E

S

PFT

Lights

A)

 To replace the carrier’s cover, grasp it by 

its upper edges and hold it squarely over the 
carrier.

B)

 Place the cover over the modules and 

make sure it fits firmly in place. If it does not 
fit, make sure all modules are seated 
properly.

C)

 Tighten the screw on the lower front of the 

cover.

Screw

Содержание Partner 308EC

Страница 1: ... kind into the slots or openings as they may touch dangerous voltage points or short out parts that could result in a risk of fire or electric shock Never spill liquid of any kind on the equipment doing so may result in serious damage to the components 7 DO NOT use the telephone to report a gas leak in the vicinity of the leak 8 The telephone equipment is provided with a three wire grounding type ...

Страница 2: ... Extensions A Before starting remove the power cord from the wall outlet B Remove the screw from the bottom of the wall mounted module or modules C If you are upgrading an existing stand alone system skip to Step 4B Attach the 2 Slot Carrier to the top right side of the two modules A Align the carrier carefully and then push firmly until the connectors on the modules snap into the carrier B Fasten...

Страница 3: ... Before installing any modules remove the clear plastic protector from the connector on the rear side of the module by grasping the tabs and lifting A Plug the power cord into a properly grounded three prong wall outlet not controlled by a switch B Power up the control unit by moving the On Off switch to the On position Tab Tab PFT MODULE R3 0 206 PFT E X T E N S I O N S L I N E S PFT PFT L I N E ...

Страница 4: ... then power up the carrier C If the lights are still out contact your local Authorized Dealer or in the Continental U S only or you may also call the hotline L I N E S PFT L I N E S PFT Lights 8A To replace the carrier s cover grasp it by its upper edges and hold it squarely over the carrier B Place the cover over the modules and make sure it fits firmly in place If it does not fit make sure all m...

Отзывы: