manualshive.com logo in svg

Avaya P333R, Руководство пользователя

Avaya P333R - качественный телефон с большим экраном и удобным набором кнопок. Для получения подробной информации по использованию устройства, загрузите бесплатное Руководство пользователя с {вебсайта}. Настройте свои контакты, настройки и функции с легкостью благодаря данному руководству.

Поделиться
Скачать
background image

Chapter 1

Overview

14

Avaya P333R User’s Guide

Multinetting (Multiple Subnets per VLAN)

In Router Mode, most applications such as RIP and OSPF, operate per IP interface. 
Other applications such as VRRP and DHCP/BOOTP Relay operate per VLAN. 
Configuration of these applications is done in the Interface mode. When there is 
only a single interface (subnet) per VLAN then system behavior is intuitive since a 
subnet and a VLAN are the same.
If the configuration includes multiple interfaces (subnets) per VLAN things start to 
get complicated.
For example, if there are two interfaces over the same VLAN and you configure 
DHCP server on one interface it will be used also for the second interface over the 
same VLAN. This behavior might be less expected and in some cases wrong.
In order to prevent misconfiguration and unexpected results, the Avaya P333R 
prevents configuration of VLAN-oriented commands on an interface unless the user 
explicitly requested to using the new "enable vlan commands" CLI command.
Configuration of "enable vlan commands" on an interface overrides this 
configuration on other interfaces that belong on the same VLAN.
This ensures that VLAN-oriented commands can be configured from one interface 
only.
In case there is only one interface over a VLAN, then VLAN oriented commands for 
this VLAN can be configured through the single interface without the need to issue 
the "enable vlan command" command.

Note:  

1. VLAN-oriented commands that were configured affect the VLAN of the interface 
that was used at the time the command was issued.
2. If the interface is moved to another VLAN (using the "ip vlan command") VLAN 
oriented configuration still relates to the original VLAN.

Router Configuration File

The Configuration File feature allows the user to read the P333R routing 
configuration parameters and save them to a file on the station. The routing 
configuration commands in the file are in CLI format. The user can edit the file (if 
required) and re-configure the P333R by downloading the configuration file. 
Although the file can be edited, it is recommended to keep changes to the file to a 
minimum. The recommended configuration method is using Avaya Multi-Service 
Network Manager P330 Device Manager and/or the CLI. Changes to the 
configuration file should be limited to those required to customize a configuration 
file from one router to suit another.

Содержание P333R















































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для P333R

N-Tron 100 Series User Manual & Installation Manual preview
100 Series
Бренд: N-Tron Страницы: 20
Magnetrol T20 Series Instruction Manual And Replacement Parts List preview
T20 Series
Бренд: Magnetrol Страницы: 12
Magnetrol T20 Series Installation And Operating Manual preview
T20 Series
Бренд: Magnetrol Страницы: 24
D-Link DES-1018P User Manual preview
DES-1018P
Бренд: D-Link Страницы: 14
Dataprobe iBoot-G2 Instructions Manual preview
iBoot-G2
Бренд: Dataprobe Страницы: 21
Indu-Sol PROmesh P10 Quick Start User Manual preview
PROmesh P10
Бренд: Indu-Sol Страницы: 9
DeLOCK 87699 User Manual preview
87699
Бренд: DeLOCK Страницы: 8
PhD Solutions MXC-P442-HDTL Operation Manual preview
MXC-P442-HDTL
Бренд: PhD Solutions Страницы: 23
NTI UNIMUX-nXm-UHD Installation And Operation Manual preview
UNIMUX-nXm-UHD
Бренд: NTI Страницы: 69
IPGARD SA-DVN-8D Quick Start Manual preview
SA-DVN-8D
Бренд: IPGARD Страницы: 2
Trust START-LINE AGC-3500 Important Information Manual preview
START-LINE AGC-3500
Бренд: Trust Страницы: 16
Alloy AMS-10T2SFP Quick Install Manual preview
AMS-10T2SFP
Бренд: Alloy Страницы: 33
TCi 13811 Installation Manual preview
13811
Бренд: TCi Страницы: 11
Little Giant RS-5 Instruction Sheet preview
RS-5
Бренд: Little Giant Страницы: 8
Scion-Tech SC01.7050 User Manual preview
SC01.7050
Бренд: Scion-Tech Страницы: 9
Wantec 2wIP-E-S-TW Installation Manual preview
2wIP-E-S-TW
Бренд: Wantec Страницы: 4
Digisol DG-GS4900SE Series Installation Manual preview
DG-GS4900SE Series
Бренд: Digisol Страницы: 23
Hored S5700-24F-8G-4TF User Manual preview
S5700-24F-8G-4TF
Бренд: Hored Страницы: 28

Бренды по названию

Популярные бренды

Загрузить еще бренды