Avaya P333R, Руководство пользователя

Страница: 144 / 270

Chapter 5 CLI – Layer 2
124 Avaya
P333T-PWR User’s Guide
The syntax for this command is:
nvram initialize [switch|all]
Output Example:
P330-N# nvram initialize
This command will force a factory default and switch-over to
the master module and disconnect your telnet session.
Do you want to continue (y/n) [n]? y
Connection closed by foreign host.
host%
rmon history
Use the
rmon history
command to create an RMON history entry.
The syntax for this command is:
rmon history <history index> [<module>[</port>]] interval
<interval> buckets <number of buckets> owner <owner name>
Output Example:
P330-N# rmon history 1026 1026 3/2 30 buckets 20 owner amir
history 1026 was created successfully
switch Resets all the switching level parameters (Layer 2 only) throughout
the stack
all Resets all parameters including licenses and routing parameters of
the Layer 3 switches present in the stack
history_index This is the history index number of this entry (it is advisable to
use the same interface number as your history index number).
module/port The switch number/the port number.
interval The interval between 2 samples.
number of
buckets The number of buckets defined.
owner name The owner name string.