Avaya P333R-LB, Руководство по установке и настройке

Страница: 130 / 218

Chapter 13 Layer 3 Redundancy
116 Avaya P333R-LB User’s Guide
master of all the virtual routers, using the
priority
command if necessary.
For SLB, a modification to VRRP is necessary. In this case, you need to backup the
VIP (in addition to a routing interface of the router). An interface on the VIP’s
subnet still has to be configured. The VIP will be configured as the Associated IP of
the VRRP.
Note: When two P333R-LBs are connected in a VRRP pair with Full NAT configured
on both, you need to configure different PIP address ranges for each P333R-LB.
VRRP Commands
The following table displays the VRRP Commands:
Figure 13.1 VRRP Commands
In order to... Use the following command...
Display VRRP information show ip vrrp
Display full VRRP-related
information show ip vrrp detail
Enable/disable VRRP routing
globally router vrrp
Create/delete a virtual router on the
interface ip vrrp
Assign/remove an IP address to the
virtual router on the interface ip vrrp address
Set the virtual router advertisement
timer value (in seconds) for the
virtual router ID ip vrrp timer
Set the virtual router priority value
used when selecting a master router ip vrrp priority
Set the virtual router simple
password authentication for the
virtual router ID ip vrrp auth-key
Configure the router to preempt a
lower priority master for the virtual
router ID ip vrrp preempt