Configuration Parameter
Default Setting
Duplex Mode
• 10/100BASE-TX ports: Half duplex
• 100/1000BASE-T ports: Full duplex
Speed Mode
• 10/100BASE-TX ports: 10 M
• 100/1000BASE-T ports: 1000 M
Flow Control Mode
• 10/100BASE-TX ports: Off
Flow Control Advertisement
• 100/1000BASE-T ports: No pause
Autonegotiation
Enabled
Administration State
Enabled
Port VLAN ID
1
Tagging Mode
Clear
Port Priority
0
Spanning Tree Cost
• 10/100BASE-TX ports : 100
• 100/1000BASE-T ports: 4
Spanning Tree Port Priority
80 Hex
5
Default Switch Parameters
Configuration Parameter
Default Setting
P130 IP address
149.49.32.134
Default gateway
0.0.0.0
VLANs
VLAN 1
Spanning tree
Enabled
Bridge priority for Spanning Tree
32768
NTP server IP address
0.0.0.0
Timezone offset
0 hours
Read-only SNMP community string
public
Read-write SNMP community string
public
Trap SNMP community string
public
SNMP retries number
3
SNMP timeout
2000 Seconds
SNMP authentication trap
Disabled
CLI timeout
15 Minutes
Default Port Parameters