Configuration Parameter
Default Setting
Duplex Mode
• 10/100BaseTX ports: Half duplex
• 100BaseFX ports/1000BaseF ports: Full duplex
Speed Mode
• 10/100BaseTX ports: 10 M
• 100BaseFX ports: 100 M
• 1000BaseF ports: 1000M
Flow Control
• Off
Flow Control Advertisement
• 1000BaseF ports: Off
Autonegotiation
• 10/100BaseTX ports/1000BaseF ports: Enabled
• 100BaseFX ports: Not applicable
Administration State
Enabled
Port VLAN ID
1
Tagging Mode
Clear
Port Priority
0
Spanning Tree Cost
• 10/100BaseTX ports : 100
• 100BaseFX ports: 20
• 1000BaseF ports: 4
Spanning Tree Port Priority
80 Hex
5
Default Switch Parameters
Configuration Parameter
Default Setting
P130 IP address
149.49.32.134
Default gateway
0.0.0.0
VLANs
VLAN 1
Spanning tree
Enabled
Bridge priority for Spanning Tree
32768
NTP server IP address
0.0.0.0
Timezone offset
0 hours
Read-only SNMP community string
Public
Read-write SNMP community string
Public
Trap SNMP community string
Public
SNMP retries number
3
SNMP timeout
2000 Seconds
SNMP authentication trap
Disabled
CLI timeout
15 Minutes
Default Port Parameters