Avaya P113F, Руководство по установке

Страница: 9 / 40

Chapter 2 Installation
Table 1 DIP Switches on the P113F Stackable Switch
Switch Function Down (OFF) UP (ON)
Reserved for Future Use
LSV Latest software version. Use the “Basic”
software version in
Bank A
Use the latest
“Application”
agent software in
Bank B (Default)
USE
SWITCH Selection of operational
mode Ignore switches. Use
management settings Use switches
(Default)
R12 Redundancy (ports 1 and
2) Disable Enable.
FDX1 Full or Half Duplex , port
1 Full Duplex. Half Duplex.
FDX2 Full or Half Duplex, port 2 (Default)
FC1 Flow control, port 1
Reserved for Future Use
Not active. Active.
FC2 Flow control, port 2
Reserved for Future Use
ISL1 ISL Tagging, port1 Not active Active
ISL2 ISL Tagging, port 2
Configuring the Module for Common Applications
The table below describes how to set the DIP switches for common applications of
the P113F.
Table 2 DIP Switch Settings for Common Configurations
Switch Configuration 1:
Backbone link to Avaya products
(LEB-200 or P113F)
Configuration 2:
Backbone link to non-Avaya
products
R12 Set according to the application
FDX ON (at both ends of link) According to other side of link
FC ON (at both ends of link) OFF
ISL ON (at both ends of link) OFF
P113F Stackable Switch Installation Guide 7