Avaya Octel 200, Руководство по установке и обслуживанию

Страница: 234 / 687

Quick Reference Guide
Octel 200/300
Maintenance Commands
Octel 200/300 S.4.1 PB60019 − 01
Command
Type
Information Command Subject
Test
Commands
(continued)
System Initialization
TE C 2 x y
or
CU x y z
Initializes and cancels forwarding for all ports
specified. Sends initialization string from System
Parameter 33 —
PBX INITIALIZE CODE
, then
cancels forward string from System Parameter 46
—
SYSTEM RELOAD CANCEL-FORWARD STRING
.
x
= slot number
y
= port number or first port in a range of ports
z
= port number of the last port in a range of ports
Floppy Disk Drive
TE F 1
Isolates faults to floppy, disk drive or disk
controller.
Integration Card
TE INT x y
Tells the integration card to run its link selftest.
Used only for systems with integration cards.
x
= slot number
y
= unit number
LIC
TE L 1
Checks tone generation and detection circuitry.
TE L 2
Ring-through test. Use only when no traffic.
TE L 4 x
Test if loop current is present on a specific port.
x
= port number
TE L 5 x
Tone reflection test on one port.
x
= port number
Network Routes
TE NET x y
Tests network routes to a network location.
x
= network location code (optional)
y
= non-zero show digits entered
System Status
TE S
Checks voltages and temperatures.
Fax Application
Processor
TE X x y z
Fax loopback test. Verifies fax modems on Fax
Application Processor can send and receive fax
data and that the TDM bus connection is correct.
x
= slot number
y
and
z
= fax channels