Operation
The Messager MP3
+
has an on-board LED status indicator. When a Message Mate MP3 card is inserted
in the Messager MP3 the LED will turn SOLID. When a card is not present or card does not have audio
programmed onto it, then the LED will FLASH.
Volume can be adjusted by the knob labeled VOLUME on the rear of the unit. Clockwise will increase
the volume, counter-clockwise will decrease the volume. If you have poor quality (such as muffled or
clipping audio) it may be connected the wrong output; try switching from 8
Ω
to 600
Ω
or vice-versa
until the desired volume and clarity is achieved.
When changing Message Mate MP3 cards, power should be removed from the unit. Changing Message
Mate MP3 cards while power is on may result in damage to the card or the playback unit.
Loading MP3’s to the Message Mate is simple:
Step 1: Locate the .MP3 files you wish to Load to the card in Windows Explorer (or navigate from My
Computer or My Documents).
Step 2: Select the MP3’s (one at a time or click-’n’-drag).
Step 3: Right Click on the selected MP3’s, or Click File.
Step 4: Highlight Send To, then Click the letter of the drive that the MP3 Messager Programmer has
been assigned. The drive should be labeled as “Removable Disk.” That’s it!
Remove the USB cable
from the Messager MP3
+
, then listen to the production to ensure it is of acceptable quality,
remove the Message Mate MP3 and ship it to your customer!
- 4 -
