SpectraLink Corporation
LinkPlus Interface Guide
Avaya DEFINITY Communications System
Part Number: 72-0171-01-B.doc
Page 14
messages, they can be customized using DEFINITY’s Language Translations
feature.
Assign Buttons
The technician can Assign Call Appearances, Line (trunk) Appearances, and
features to buttons to fit user needs.
If the Wireless Telephone will be used in conjunction with a wired station,
administer the Wireless Telephone as a Bridged Appearance of the wired station.
•
Assign buttons 1-3 as bridged appearances (
brdg-appr
)
of the wired station.
This will allow the first three appearances on the Wireless Telephone to
correspond to the first three appearances on the wired station.
•
Assign buttons 4-5 as call appearances (
call-appr
). This must be done
because DEFINITY requires at least two call appearances of the extension on
each station.
•
To make the Wireless Telephone ring when the wired station rings, change
Bridged Call Alerting
to
Yes
on the wired station.
If the Wireless Telephone is not a bridged appearance of a wired station, assign
buttons 1-3 as call appearances (
call-appr
).
Duplicate Programming
After the model Wireless Telephone or phones have been completely programmed, use
the
duplicate station
command to copy the programming to all “like” Wireless
Telephones. Change the extension of the bridged appearance on each set as it is copied.
The installer can now test the Wireless Telephones.
