Avaya J169 Скачать руководство пользователя

Страница: 90 / 203

Setting up a DHCPv6 server

About this task

Important:

Avaya does not support IPv6 for the general market, and makes the software available to a

specific set of customers with known limitations. Any additional limitation or bugs discovered

within this release will be considered for resolution in future major releases.

To set up the DHCPv6 server:

Procedure

1. Install the DHCP server software according to vendor instructions.

2. Configure the DHCP server to send a Vendor-Specific Information (VSI) option with an

enterprise number of 6889 which is the Avaya Enterprise Number.

3. Include the vendor-specific option with an opt-code of 242 within that option.

4. Set the option-data portion of the vendor-specific option with the applicable parameters.

For information about the parameters, see the site-specific DHCP options.

Additionally, the parameters DOMAIN and DNSSRVR can be set in other numbered
options by DHCP. These parameters can also be set in the Avaya DHCPv6 vendor-specific
option.

Result

The vendor-specific option is processed after the DHCP fields and standard options. As such, any

values set using the VSI will supersede any values that are set using DHCP fields or standard

options, as well as any other previously set values.

Related links

Server Administration

on page 82

HTTP generic setup

About this task

You can store the same application software, script file, and settings file on an HTTP server. The

phone uses the application software, script file, and settings file. The phone might lose some

functionality, if you reset the HTTP server or the HTTP server is unavailable. MVIPTEL and IIS6

are not supported with HTTPS. When using HTTPS, before upgrading, you must replace the

server.

Caution:

Ensure that the files defined by the HTTP server configuration are accessible from all IP

Deskphones that need those files. Ensure that the file names match the names in the upgrade

script, including case, as UNIX systems are case-sensitive.

Administering your phone

May 2018

Installing and Administering Avaya J169/J179 IP Phone H.323

Comments on this document? [email protected]

Содержание J169












































































































































































































Результаты поиска

Содержание J169

Отзывы:

Похожие инструкции для J169

Бренды по названию

Популярные бренды

Avaya J169, Установка и администрирование

Результаты поиска

Содержание J169

Отзывы:

Похожие инструкции для J169

Бренды по названию

Популярные бренды