IP Office Technical Bulletin number 145
COMPAS ID 157236 Issue 2
Page 16 of 59
From this page there are links to modify the configuration, launch the voicemail pro
client and make changes to resilience settings.
You can also add and remove devices from the solution. All systems should be
added to the solution from here, you cannot manually add systems in to the network.
From the Solution view page you can either click on Solution or an individual system
in the list and then click on configuration, this will open up the navigation pane on the
left hand side, this will be familiar to you as the same navigation pane that you see
when administering a standard IP Office system.
The Navigation Pane is split into a number of areas. The top area is User, Hunt
Groups, Short Code, Incoming Call Route, Directory, Time Profile, Account Code and
User Rights, these are all solution wide. Any configuration that is created at this top
level is shared across all systems in the network.
Note: Dial short codes are not shared across systems and will be unique to each
device in the network.
Underneath this area you will see the configurations from all of the systems in the
network. Any items configured at this level are unique to that device only and will not
be shared. The tree structure is very similar to the existing Manager.
Hunt Groups can only exist on the Primary server and are created at the top level in
Manager. They are all multi-site network groups and can contain users from any
system in the network. Hunt Groups can be backed up on the Secondary server
The system directory is now centralized for ease of management. The secondary
server and expansion systems use the Primary server as the source of the system
directory. The overall directory capabilities and capacities remain unchanged.
When Server Edition Manager starts up and connects to the Primary server it loads
all configurations that it can. If it cannot find a system online it will offer the user the
option of loading the offline configuration for that system.