Small Office Edition Installation Manual
Page 17
IP Office 3.0
40DHB0002UKED Issue 3 (4th February 2005)
Preparing for Installation
Preparing for Installation
This section reviews the requirements for installing an Avaya IP Office - Small Office Edition system. You
must meet these requirements for the system to operate safely and in the intended manner.
This section covers
•
Tools & Parts Required.
•
Space Requirements
•
Environmental Requirements
Power Supply Requirements Tools & Parts Required
General
•
Pozidrive No. 1 screwdriver for removal of unit covers.
•
Cutter/knife for cable ties.
•
Cable ties
•
Pozidrive No. 4 screwdriver for Analog Trunk 16 expansion module grounding post.
•
Note:
In addition, ensure that you have sufficient cables that are
not supplied
with the modules,
for example Line Cords for structured cabling (see DT Line Cord for Structured Cabling) and
power supply cables (see Country Variants).
Programming
These are the tools required for programming of a newly installed Avaya IP Office - Small Office Edition
system.
•
PC running Windows 2000/ME/XP or NT with the following specification: Intel Pentium ll 333Mhz
or faster, 100MB HD space, CD-ROM drive, COM port, terminal emulation (eg. HyperTerminal)
and a SVGA Monitor (set to 1024 by 768).
•
PC with a LAN card with either a fixed IP address (allocated by your system administrator) or be
using DHCP to obtain an IP address.
•
IP Cat. 5E patch cable (red – supplied with system, see PRI/BRI ISDN Cable).
•
Small Office Edition Administration CD (1 of 3 - supplied with system).
•
Small Office Edition User CD (2 of 3 - supplied with system).
•
Small Office Edition Documentation CD (3 of 3 - supplied with system).
•
Small Office Edition Manager Application Manual (supplied on CD1 with system).
•
Small Office Edition Feature Key device (Dongle) that is required where software that requires a
Licence Key is to be installed.