Avaya INDeX 9.2+ 20DT, Руководство пользователя

Страница: 7 / 22

Set-Up - Page 7
INDeX DECT 20DT Handset User's Guide Profiles - Page 7
38DHB0002UKCW – Issue 7 (10/03) Set-Up
Set-Up
Profiles
Your Avaya DECT 20DT handset can be set-up for two user-defined profiles (see below
and 20DT Menu Structures on page 5.:
•
Indoors (1) e.g. for office working
•
Outdoors (2) e.g. for use in a manufacturing environment.
Within each profile you can set-up different parameters for:
•
Ringer Tone : See page 9.
•
Ringer Volume : See page 9.
•
Key Click On/Volume : See page 11.
•
Vibrator On/Off : See page 11.
•
B-Answer On/Off : See page 9.
•
Start Volume : See page 8.
•
Out of Range Indicator : See page 11.
•
Back Lighting On/Off : See page 7.
To select Profile 1 or 2:
1. Press MENU * and . SET PROFILE/PROFILE 1 appears.
2. Press > until required profile appears.
3. Press to select profile and continue with setting up of the parameters (see above).
Press MENU to finish.
* Note: On older menu structures (see pages 4 and 5), after pressing MENU , press > to
display PROFILE SET UP. Press and > until required profile appears.
Press and continue from step 3.
Silent Mode
If you do not want your 20DT to ring when an incoming call is presented, you can select
Silent Mode. You can also Mute your microphone during a call
(see page 8).
1. Press MENU followed by SILENT . SILENT appears and your 20DT will vibrate when
incoming calls are presented.
2. To return to normal use, repeat the above. SILENT disappears and a tone is given.
Backlight Display
You can select if your 20DT handset display is to be backlit.
1. Press
MENU * and . SET PROFILE/PROFILE 1 appears..
2. Press > until required profile appears.
3. Press > until BACKLIGHT appears and then press .
(Use < and > to select ON or OFF.)
4. When done, press to save.
5. Press
MENU to finish.
* Note: On older menu structures (see pages 4 and 5), after pressing MENU , press > to
display PROFILE SET UP. Press and > until required profile appears.
Press and continue from step 3.