2. Do one of the following:
• To delete a specific memory, press
DELETE
.
The programmer displays
DELETE?
.
• To delete all memory locations, press
DELETE
until the programmer displays
DELETE
ALL?
.
3. To delete the specific or all memory locations, press
DELETE
.
4. To exit, press
PROG
.
Transferring stored numbers in the phone
Before you begin
Ensure that the Avaya H219 analog phone to be programmed is not connected to the telephone
line before connecting it to the memory programmer.
Procedure
1. Connect one end of the cable to socket
J1
of the memory programmer and the other end
to socket
J6
of the phone.
Socket J6 is located under the faceplate.
The programmer displays
CONNECTED
.
2. To upload the stored number in the telephone, press
UPLOAD
.
The programmer displays
UPLOADING
. If the uploading is successful, the programmer
displays
OK
. If the uploading fails, the programmer displays
ERROR!
.
3. Disconnect the cable from the phone.
Feature Access Codes
You can use Feature Access Codes (FAC) to provide users with quick access to certain features
of the phone. Avaya H219 analog phone programmable buttons are programmed with default
feature access codes. You can configure Avaya Aura
®
or IP Office to use these default FAC to
access the functions. You can also assign functions to the Avaya H219 analog phone
programmable buttons or voice mail button using the Avaya H200 Programmer.
The following table lists the default FAC corresponding to the programmable buttons on Avaya
H219 analog phones:
Transferring stored numbers in the phone
January 2020
Installing and Administering the Avaya H209 and H219 Phones
15