manualshive.com logo in svg

Avaya G700, Установка и обновление, Страница: 626 / 808

Поделиться
Скачать
Avaya G700 Скачать руководство пользователя страница 626

Manual upgrade of an existing S8300B or S8300C and G700 to R4.0

626 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server

 

Pre-upgrade service pack (starting from R2.x only)

This upgrade requires a pre-upgrade service pack. The service pack filename differs, 
depending on which software load the media server is on. See 

Table 38: Pre-Upgrade service 

pack filenames for software release and load

 for the software load associated with each 

release.

!

CAUTION:

CAUTION:

If the customer’s system has Release 2.x of Communication Manager but has a 
field load other than those listed in the table, do not use this section to upgrade 
Communication Manager to Release 4.0. You must escalate.

Post-upgrade service pack 

A post-upgrade service pack may be required. If so, download it from 

http://www.avaya.com/

support

 on the Internet.

To download service packs to the laptop

1. On your laptop, create a directory to store the file (for example, c:\S8300download).

2. Connect to the LAN using a browser on your laptop or the customer’s PC and access 

http://

www.avaya.com/support

 on the Internet to copy the required Communication Manager 

service pack file to the laptop.

3. At the Avaya support site, click 

Downloads

4. Click on 

Latest TN Circuit Pack, Media Server, and Media Gateway Firmware and 

Software Updates

.

Table 38: Pre-Upgrade service pack filenames for software release and load

Software release of 
existing media server

Associated software load

Service pack filename

Release 2.0

R012x.00.0.219.0

00.0.219.0-xxxx.tar.gz

Release 2.0.1

R012x.00.1.221.1

00.1.221.1-xxxx.tar.gz

Release 2.1

R012x.01.0.411.7

01.0.411.7-xxxx.tar.gz

Release 2.1.1

R012x.01.1.414.1

01.1.414.1-xxxx.tar.gz

Release 2.2

R012x.02.0.111.4

02.0.111.4-xxxx.tar.gz

Release 2.2.1

R012x.02.1.118.1

02.1.118.1-xxxx.tar.gz

Содержание G700









































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов