Avaya G700, Установка и обновление, Страница: 557 / 808

Preparing for the upgrade to R4.0 on-site
Issue 10.2 May 2007 557
3. Check the Reports as: field for the release number of the S8300 software.
In this example, the release number is reported as R011x.02.0.524.0. This corresponds to
release 1.2.0.
Table 37 maps the release number to the Reports as: field, and specifies
whether or not a pre-upgrade update is required.
Completing pre-upgrade tasks — if the S8300 is the primary
controller
Skip to Backing up system files on page 565, if the S8300 is configured as an LSP.
!
CAUTION:
CAUTION:
If you are upgrading an S8300 primary controller that has LSPs registered to it,
the LSPs must be upgraded
before the primary controller. (You can use the SAT
command, list media-gateway, to see if there are LSPs registered to the S8300.)
Table 37: Software Release Numbers
Release Number
Reported as Release
Number Pre-upgrade
update
Required?
From:
R011x.01.0.xxx
To:
R011x.01.9.xxx
1.1.0 to
1.1.9 No, but requires
an upgrade to
1.3
From:
R011x.02.0.xxx
To:
R011x.03.0.xxx
1.2.0 to
1.3.0 Yes
From:
R011x.03.1.xxx
To:
R011x.03.9.xxx
1.3.1 to
1.3.9 No
From:
R012x.00.0.xxx
To:
R012x.00.9.xxx
2.0.0 to
2.0.9 No