manualshive.com logo in svg

Avaya G700, Установка и обновление, Страница: 391 / 808

Поделиться
Скачать
Avaya G700 Скачать руководство пользователя страница 391

External modems

Issue 10.2 May 2007

391

 

External modems

The following section assumes that you are using one of the recommended external modems. 
However, any locally obtained, type-approved external modem should work. Contact your 
Avaya representative for more information.

Recommended modems include:

●

Multi-Tech MT5634ZBA-USB-V92

 

This section covers:

●

Hardware required when configuring modems

on page 391

●

Multi-Tech MT5634ZBA-USB-V92

on page 391

●

Multi-Tech MT5634ZBA-V92-GLOBAL

on page 392

●

Administering Multi-Tech modems

on page 392

Hardware required when configuring modems

To configure many modems, you use the Hayes-compatible AT command set.

Note:

Note:

If your modem uses a USB connection, use the USB ports instead of the serial 
port. Also, AT commands are not required, so you can skip this section. Use the 
factory defaults.

Before you can enter AT configuration commands, you must first connect a terminal or a PC 
with a keyboard, monitor, and terminal-emulation software to the modem.

Proceed as follows:

1. Connect one end of an RS-232 cable to an RS-232, serial-communications port (often 

called a COM port) on the terminal or PC.

2. Connect the other end of the RS-232 cable to the modem.

3. If you are using a PC, start your terminal emulation software.

Multi-Tech MT5634ZBA-USB-V92 

Avaya recommends using a Multi-Tech USB modem, model MT5634ZBA-USB-V92, with an 
S8300/700, S8500, or S8700/S8710 configuration. This modem is used for sending alarms, as 
well as for remote dial up to the server for maintenance and administration.

Содержание G700









































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов