Avaya G450 Manager, Справочное руководство CLI

Страница: 885 / 1334

Routing table configuration
Issue 1 January 2008 885
To set the default gateway to be the Serial interface:
G450-001(super)# ip default-gateway Serial 4/1:1.1 permanent
Related Commands
clear ip route , ip netmask-format , ip redirects , ip route , ip routing , show ip route , show ip route
best-match , show ip route static , show ip route summary , show ip route track-table , traceroute
ip netmask-format
Use the
ip netmask-format
command to specify the format of netmasks in the
show
command output. Use the
no
form of this command to restore the format to the default format.
Syntax
ip netmask-format mask_format
no ip netmask-format
Parameters
User Level
read-write
Context
general
Example
To display netmasks in bitcount format:
G450-001(super)# ip netmask-format bitcount
Parameter Description Possible Values Default
Value
mask_format
The format of
the netmasks bitcount - addresses are followed by
a slash and the total number of bits in
the netmask, such as 17
decimal - the network masks are in
dotted decimal notation, such as
255.255.255.0
hexadecimal - the network masks
are in hexadecimal format as
indicated by the leading 0X, such as
0XFFFFFF00
decimal