Avaya G450 Manager, Справочное руководство CLI

Страница: 866 / 1334

CLI Commands RIP
866 Avaya G450 CLI Reference
Parameters
User Level
read-write
Context
Router: rip
Example
To apply distribution access list 10 to incoming router updates on the VLAN 1 interface:
G450-001(router:rip)# distribution-list 10 in "Vlan 1"
To apply distribution access list 20 to outgoing router updates on the Serial 3/1:1 interface:
G450-001(router:rip)# distribution-list 20 out "Serial 3/1:1":
To apply distribution access list 40 to outgoing router updates from OSPF:
G450-001(router:rip)# distribution-list 40 out ospf
Related Commands
default-metric (RIP) , network (RIP) , redistribute (RIP) , timers basic
network (RIP)
Use the
network
command to specify a list of networks on which the RIP is running. Use the
no
form of this command to remove an entry.
Syntax
[no] network ip_address [ wildcard_mask ]
Parameter Description Possible
Values Default
Value
access_list_
number
The number of the access list 1-99
type
The type of the access list in , out
interface_
type
The interface type
interface_
number
The interface number
protocol
The protocol. This parameter is only
relevant for outgoing list entries. static ,
ospf