Avaya G450 Manager, Справочное руководство CLI

Страница: 770 / 1334

CLI Commands Policy-based routing
770 Avaya G450 CLI Reference
Context
ip capture-list/ip-rule, ip access-control-list/ip-rule, ip pbr-list/ip-rule, ip qos-list/ip-rule, ip
crypto-list ip-rule
Note:
Note:
The
not
form of the command is not relevant in the crypto-list ip-rule context.
Example
To specify that rule 27 applies to ICMP error-reply packets:
G450-001(ACL 333/ip rule 27)# icmp Echo-Reply
To specify that rule 33 applies to any ICMP packet type except type 1 code 2:
G450-001(ACL 333/ip rule 33)# not icmp 1 2
Related Commands - Policy-based routing
destination-ip , dscp (policy-based routing, packet sniffing, VPN) , ip-protocol , show ip
capture-list , source-ip , tcp destination-port , tcp source-port , udp destination-port , udp
source-port
Related Commands - Policy
composite-operation , cookie , destination-ip , dscp (policy) , dscp-table , icmp , ip-rule (policy,
policy-based routing, packet sniffing) , owner , show composite-operation , show dscp-table ,
show isdn bri link , show list , source-ip , tcp destination-port , tcp established , tcp source-port , udp
destination-port , udp source-port
Related Commands - VPN
description (ip rule) , destination-ip , dscp (policy-based routing, packet sniffing, VPN) , fragment ,
ip crypto-list , ip-protocol , ip-rule (VPN) , local-address , protect crypto map , source-ip , show ip
crypto-list , tcp destination-port , tcp source-port , udp destination-port , udp source-port
ip-rule (policy, policy-based routing, packet sniffing)
Use the
ip-rule
command to enter configuration mode for the specified rule. If the specified
rule does not exist, the system creates it and enters its configuration mode.
Syntax
ip-rule
{
rule_index | default
}