Avaya G450 Manager, Справочное руководство CLI

Страница: 769 / 1334

Policy-based routing
Issue 1 January 2008 769
Related Commands - Packet sniffing
composite-operation , copy capture-file ftp , copy capture-file scp , copy capture-file tftp , ip-rule
(policy, policy-based routing, packet sniffing) , owner , show ip capture-list , show upload status
Related Commands - Policy
composite-operation , dscp-table , ip-fragments-in , ip-option-in , ip-rule (policy, policy-based
routing, packet sniffing) , name , owner , show composite-operation , show isdn bri link , show list
icmp
Use the
icmp
command to specify that the current rule applies to a specific type of ICMP
packet.
Use the
not
form of this command to specify that the rule applies to all packets except those of
the requested ICMP attribute. If the IP protocol is not ICMP, it is set to ICMP.
Use the
no
form of the command to specify that the current rule applies to any type of ICMP
packet.
Note:
Note:
The
icmp
command also sets the IP protocol to ICMP.
Syntax
[not] icmp { name | { icmp_type icmp_code }}
no icmp
Parameters
User Level
read-write
Parameter Description Possible Values Default
Value
name
Specify that the rule
applies to this ICMP name
icmp_type
Specify that the rule
applies to this icmp type For an ip-rule: 0-256
For a QoS rule: 0-65535
icmp_code
Specify that the rule
applies to this icmp code For an ip-rule: 0-256
For a QoS rule: 0-65535