Avaya G450 Manager, Справочное руководство CLI

Страница: 760 / 1334

CLI Commands Policy - QoS lists
760 Avaya G450 CLI Reference
User Level
read-write
Context
interface:Serial (DS1 PPP L2, DS1 PPP L2-L3, DS1 FR-SUB L2, DS1 FR-SUB L2-L3,
USP PPP L2, USP PPP L2-L3), Loopback (L2, L2-L3), FastEthernet (L2-L3, L3, PPP L2,
PPP L2-L3, PPP L3), Tunnel (L2, L2-L3), VLAN (L2, L2-L3), Dialer (L2, L2-L3)
Example
To simulate the effects of applying access control list 330 to a packet entering the media
gateway through the FastEthernet interface, from IP address 192.67.85.12 to IP address
192.67.54.25:
G450-001(if:FastEthernet 10/2)# ip simulate 330 in 192.67.85.12 192.67.54.25
ip
Related Commands
ip access-control-list , ip access-group , ip policy-list-copy , ip qos-group , ip qos-list ,
pre-classification , show ip access-control-list , show ip qos-list
show ip qos-list
Use the
show ip qos-list
command to display the attributes about a specific QoS list, or all
QoS lists, for the current interface.
Note:
Note:
To specify an interface name that includes spaces, enclose the entire name in
quotation marks (for example, “FastEthernet 10/2”).
Syntax
show ip qos-list { list_number | all | active-list-in | active-list-out
| active-list-in-out} [detailed]
source_port
The source port of the
simulated packet 1-65535
destination_
port
The destination port of the
simulated packet 1-65535
established
The value of the TCP
established bit
Parameter Description Possible Values Default Value