Avaya G450 Manager, Справочное руководство CLI

Страница: 736 / 1334

CLI Commands Policy - QoS lists
736 Avaya G450 CLI Reference
Note:
Note:
The
not
form of the command is not relevant in the crypto-list ip-rule context.
Example
To specify that rule 27 applies to ICMP error-reply packets:
G450-001(ACL 333/ip rule 27)# icmp Echo-Reply
To specify that rule 33 applies to any ICMP packet type except type 1 code 2:
G450-001(ACL 333/ip rule 33)# not icmp 1 2
Related Commands - Policy-based routing
destination-ip , dscp (policy-based routing, packet sniffing, VPN) , ip-protocol , show ip
capture-list , source-ip , tcp destination-port , tcp source-port , udp destination-port , udp
source-port
Related Commands - Policy
composite-operation , cookie , destination-ip , dscp (policy) , dscp-table , icmp , ip-rule (policy,
policy-based routing, packet sniffing) , owner , show composite-operation , show dscp-table ,
show isdn bri link , show list , source-ip , tcp destination-port , tcp established , tcp source-port , udp
destination-port , udp source-port
Related Commands - VPN
description (ip rule) , destination-ip , dscp (policy-based routing, packet sniffing, VPN) , fragment ,
ip crypto-list , ip-protocol , ip-rule (VPN) , local-address , protect crypto map , source-ip , show ip
crypto-list , tcp destination-port , tcp source-port , udp destination-port , udp source-port
ip-protocol
Use the
ip-protocol
command to specify that the current rule applies to packets having the
specified IP protocol.
Use the
no
form of the command to set the IP protocol to its default value.
Use the
not
form of this command to specify that the current rule applies to all packets except
those having the specified IP protocol.
Syntax
[not] ip-protocol protocol_name | protocol_number
no ip-protocol