Avaya G450 Manager, Справочное руководство CLI

Страница: 67 / 1334

Issue 1 January 2008 67
Ethernet port configuration
show controllers
remote
Display controller statistics from a peer station
show ds-mode
Display the current mode of the controller
Table 31: E1/T1 port configuration CLI commands (continued)
Root level command First level command Description
2 of 2
Table 32: Ethernet port configuration CLI commands
Command Description
set port
auto-negotiation-flowcontrol-
advertisement
Set the flowcontrol advertisement for the specified
Gigabit Ethernet ports when performing
auto-negotiation
set port duplex
Configure the duplex type (full or half duplex) of an
Ethernet or FastEthernet port or range of ports
set port edge admin state
Determine whether the port is an edge port, for the
purposes of Rapid Spanning Tree Protocol (RSTP)
set port enable | disable
Enable or disable a port or a range of ports
set port flowcontrol
Set the send/receive mode for flowcontrol frames
(IEEE 802.3x or proprietary) for a full duplex port
set port level
Set the default packet priority level for untagged
packets
set port name
Configure a name for a port
set port negotiation
Enable or disable auto-negotiation on the port
set port point-to-point admin
status
Set the connection type of the port:
force-true
,
force-false
, or
auto
set port speed
Set the speed of a port or range of ports
show port
auto-negotiation-flowcontrol-
advertisement
Display the flowcontrol advertisement for a Gigabit
port used to perform auto-negotiation
1 of 2