Avaya G450 Manager, Справочное руководство CLI

Страница: 244 / 1334

CLI Commands Contact closure
244 Avaya G450 CLI Reference
User Level
read-only
Context
general
Example
To send test 50-byte packets to IP address 192.168.49.1 from IP address 192.168.49.4 every 3
seconds, timing out after 5 seconds:
G450-001(super)# ping 192.168.49.1 3 50 5 192.168.49.4
Contact closure
set contact-closure admin
Use the
set contact-closure admin
command to specify how the contact closure relay is
controlled.
Note:
Note:
The
set contact-closure pulse-duration
command does not affect the
set contact-closure admin manual
command.
Syntax
set contact-closure admin module/port : relay
{mgc | manual-trigger | manual-off}
Parameters
Parameter Description Possible
Values Default
Value
module
Module number of the contact closure port 10
port
Port number of the contact closure port 2
relay
Contact closure relay 1 , 2
mgc
Contact closure is controlled by the call
controller