Avaya G450 Manager, Справочное руководство CLI

Страница: 1238 / 1334

CLI Commands VPN
1238 Avaya G450 CLI Reference
Examples
To set the DSCP value in the tunneled packet to 10:
G450-001(config-crypto:1)# set dscp 10
To specify that the DSCP is copied from the DS field of the original packet:
G450-001(config-crypto:1)# no set dscp
Related Commands
continuous-channel , description (crypto map) , set peer (crypto map) , set peer-group , set
transform-set
set peer (crypto map)
Use the
set peer
command to attach a peer to a crypto map. Use the
no
form of the
command to remove the peer from the crypto map.
Note:
Note:
You can only change the peer of a crypto map when the map is inactive.
Note:
Note:
The
set peer
and
set peer-group
commands are mutually exclusive. You
can attach to a given crypto map either a peer or a peer-group, not both.
Syntax
set peer { ip-address | hostname }
no set peer
Parameters
User Level
read-write
Context
crypto map
Parameter Description Possible
Values Default
Value
ip-address
The remote peer IP address
hostname
The remote peer hostname