Avaya G450 Manager, Справочное руководство CLI

Страница: 1123 / 1334

Synchronization
Issue 1 January 2008 1123
User Level
read-write
Context
general
Example
To set the primary clock as the clock source:
G450-001(super)# set sync source primary
If the secondary interface is not configured, the sync source set operation will fail:
G450-001(super)# set sync source secondary
Operation Failed
Cannot set the secondary clock source to be the active clock source
Related Commands
clear sync interface , set sync interface , set sync switching , show sync timing
set sync switching
Use the
set sync switching
command to toggle automatic failover and failback between
designated primary and secondary synchronization sources.
Syntax
set sync switching {enable | disable}
secondary
Keyword specifying to set the secondary
clock source to be active, and the primary
clock source on standby
local
Keyword specifying to set the local clock to
be active
Parameter Description Possible
Values Default
Value