Avaya G450 Manager, Справочное руководство CLI

Страница: 1117 / 1334

SSH protocol
Issue 1 January 2008 1117
Parameters
User Level
admin
Context
general
Related Commands
clear ssh-client known-hosts , crypto key generate , ip ssh , show ip ssh
hostname
Use the
hostname
command to change the Command Line Interface (CLI) prompt. The prompt
is written as hostname-registration , where the
hostname
is the value entered with the
hostname
command, and
registration
is the media gateway registration information. If the
device is registered, the current media gateway number appears. If the device is not registered,
question marks are displayed.
Use the
hostname
command with no parameters to display the current prompt value. Use the
no
form of this command to return the CLI prompt to the default.
Syntax
hostname [ hostname_string ]
no hostname
Parameters
User Level
read-write
Parameter Description Possible
Values Default
Value
session_id
The number of the SSH session to disconnect
Parameter Description Possible
Values Default
Value
hostname_
string
The hostname a string of up to
20 characters G450