manualshive.com logo in svg

Avaya G430, Руководство пользователя

Поделиться
Скачать
Avaya G430 Скачать руководство пользователя страница 564

Policy list attachments

Attached to each interface on the Branch Gateway are policy lists, including the ingress access
control list, ingress QoS list, egress access control list, and egress QoS list.

 Note:

You can also attach PBR lists to certain interfaces, but PBR lists are not attached to any
interface by default.

Related topics:

Packets entering the interface

 on page 564

Packets exiting the interface

 on page 564

Policy lists to packets

 on page 565

Policy list attachment configuration

 on page 565

Attaching policy lists and access control lists

 on page 565

Attaching policy lists and QoS lists

 on page 566

Removing a list

 on page 566

Packets entering the interface

When a packet enters the Branch Gateway through an interface, the Branch Gateway applies
the policy lists in the following order:

1. Apply the ingress access control list.

2. If the ingress access control list does not drop the packet:

• Apply the ingress QoS list.

• Apply the PBR list (if any).

The packet enters the Branch Gateway through the interface.

Packets exiting the interface

When a packet exits the Branch Gateway through an interface, the Branch Gateway applies
the policy lists in the following order:

1. Apply the egress access control list.

2. If the egress access control list does not drop the packet, apply the egress QoS

list.

The packet exits the Branch Gateway through the interface.

Policy lists

564     Administering Avaya G430 Branch Gateway

October 2013

Comments? [email protected]

Содержание G430

























































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды