Avaya ERS 8600 series, Руководство по настройке

Страница: 142 / 420

Variable Value
• backupDesignatedRouter
• otherDesignatedRouter
DesignatedRouter A read-only field indicating the router ID of the designated
router.
BackupDesignatedRouter A read-only field indicating the router ID of the backup
designated router.
Events A read-only field indicating the number of times this OSPF
interface changed state or an error occurred.
MetricValue The metric assigned to this interface. The default metric
value is the reference bandwidth or ifSpeed. The value of
the reference bandwidth is configured by the
rcOspfv3ReferenceBandwidth object.
LinkScopeLsaCount A read-only field indicating the number of Link-Scope link-
state advertisements in the link-state database.
LinkLsaChksumSum A read-only field indicating the 32-bit unsigned sum of the
Link-Scope link-state advertisement LS checksums in the
link-state database. The sum determines a change in the
router link-state database and compares the link-state
database of two routers.
Creating OSPF VLAN interfaces
You configure an OSPF interface, or link, on an IP interface. In the Avaya Ethernet Routing
Switch 8800/8600, an IP interface is either a single link (brouter port) or a logical interface
configured on a VLAN (multiple ports). The underlying low level protocols and the routing
protocol itself obtain the state information associated with the interface.
When you enable an OSPF interface, you designate the interface as one of the following types:
• broadcast (active)
• nonbroadcast multiaccess (NBMA)
• point-to-point
• point-to-multipoint
Important:
When you enable an OSPF interface, you cannot change the interface type. You must first
disable the interface. After you disable the interface, you can change the type and reenable
it. On NMBA interfaces, you must also delete all manually configured neighbors before you
change the type.
IPv6 routing configuration using Enterprise Device Manager
142 Configuration — IPv6 Routing November 2010