Avaya ERS 8600 series, Руководство по настройке

Страница: 109 / 420

Adding static entries to the neighbor cache
The neighbor cache is populated with information about IPv6 neighbors to which the IPv6
device sends traffic. You can add neighbors to the cache manually.
Procedure steps
Add a neighbor by using the following command:
config ipv6 neighbor add ports
<slot/port>
ipv6addr
<ipv6 address>
mac
<mac address>
vlanid
<vlan id>
Variable definitions
Use the data in the following table to use the
config ipv6 neighbor add ports
command.
Variable Value
ipv6 address Specifies the IPv6 address in hexadecimal
colon format {string length 0..128}
mac address Specifies the MAC address in the following
format: {0x00:0x00:0x00:0x00:0x00:0x00}
slot/port Specifies the slot and port location to add a
neighbor for a brouter port.
vlan id Specifies the ID of the VLAN to add a
neighbor for a VLAN.
Example of adding static entries to the neighbor cache
Procedure steps
1. Add a VLAN static entry.
ERS-8610:5# config ipv6 neighbor add ports 4/17 ipv6addr
9999:0:0:0:0:0:0:1 mac 00:80:2d:c0:92:03 vlanid 14
2. Add a brouter port static entry.
Adding static entries to the neighbor cache
Configuration — IPv6 Routing November 2010 109