Disclaimer:
Configuration Notes are designed to be a general guide reflecting AVAYA Inc.’s experience
configuring its systems. These notes cannot anticipate every configuration possibility given the inherent
variations in all hardware and software products. Please understand that you may experience a problem
not detailed in a Configuration Note. If so, please notify the TAC/TSO at (408) 922-1822 and if
appropriate we will include it in our next revision. AVAYA Inc. accepts no responsibility for errors or
omissions contained herein.
O c t e l ® 1 0 0
M e s s a g i n g S e r v e r
Configuration Note 7036
Avaya Definity G3
*
with Vectoring
& VoiceBridge
®
(Bridged Mode)
Revised 06/21/01
Analog Ports
Voice Bridge
Personal Computer
Digital Port
Voice Board(s)
RS-232 Connection via
Cable to the serial port
on the PC
1.0 METHOD OF INTEGRATION
RS-232/SMDI using the VoiceBridge Series II with bridged mode. The Voice-
Bridge communicates with the Avaya Definity by emulating the
7434D
Digital
Display
set. When a call is received by the VoiceBridge,
it
simultaneously rings at a bridged analog appearance corresponding to an
Octel 100 voice port.
The digital display provides call information. The
VoiceBridge collects this data and transmits the call information to the Octel
100 through a serial port using industry standard Centrex SMDI protocol. The
Octel 100 then immediately answers the call with the appropriate greeting.
Message waiting indicators are set and canceled via the VoiceBridge using
Avaya Leave Word Calling feature. A hookflash followed by the extension
transfers the caller to the operator.
Communication between the
Definity G3 and the Octel 100 is
through the VoiceBridge using
the Bridged Method.
