Select Button
✔
To use either of the
1 Choose either of the following after pressing [
Select
]:
features that require
●
the Select button
([
Select
])
●
Press [
Drop test
] to initiate a self-test of your voice
terminal lights and ringer. For procedures, see "Self-
Test" in this section.
Press [
Conference Ring
] to select one of 8 personalized ringing
patterns for your voice terminal. For procedures,
refer to "Select Ring" in this section.
Select Ring and Ringer Volume
✔
To select a personalized
1 Press [
Select
] (while on-hook)
ring
●
Green light goes on
2
Press [
Conference Ring
]
●
Green light next to [
Select
] flutters
●
Current ring pattern plays and repeats every 4
seconds
3
Continue to press [
Conference Ring
] to cycle through all 8
ringing patterns
4
When you hear the desired ringing pattern, press
[
Select
] again
●
Your new ring is set. Light next to [
Select
] goes off
Note:
If you receive a call, go off-hook, or lose power
during selection, process is interrupted and you must
begin again. If you lose power after selection, you will
also have to select your ring pattern again.
19
