Avaya DEFINITY 4606 Скачать руководство пользователя страница 51 | Manualshive

Страница: 51 / 60

Avaya DEFINITY 4606 Скачать руководство пользователя страница 51

Personalizing Your Telephone’s Ringing Pattern

Issue 1 July 2001

7-3

Personalizing Your Telephone’s
Ringing Pattern

The Select Ring feature lets you choose your own personalized ringing pattern
from among eight different patterns.

Selecting a personalized ringing pattern

With the phone on-hook, press

.

The current ringing pattern sounds and repeats every three seconds.

Continue to press (and then release)

to cycle through each of the

eight ring patterns.

To save a ringing pattern as it plays, do not continue to press

. You hear the

selected ringing pattern two more times, after which it is automatically saved.

A confirmation tone (two rising tones) sounds and your new ringing pattern
is set.

NOTE:

Going off-hook, receiving a call or losing power during ring pattern selection
interrupts the process, and you must start over from Step 1.

Interpreting Indicator Lights

As you become more familiar with your IP Telephone, you will recognize the lights
associated with a Line/Feature button. The chart below provides an overview of
the indicator lights you see; check with your System Administrator to verify if the
descriptions are accurate for your system.

Light

Meaning

Steady Red

The line is available.

Steady Green

Indicates the line is in use or the
feature programmed for that button is
on (active).

Blinking Green

Indicates a call is on hold on this line.

Flashing Green

An incoming call is arriving on this
line.

Fluttering Green

This line’s call was put on hold
pending a conference or a transfer.

«
...
49
50
51
52
53
...
»

Содержание DEFINITY 4606





























































Отзывы:

Нет отзывов