Avaya CMC1, Процедуры обслуживания

Страница: 94 / 426

License and Authentication files
License File modes
94 Maintenance Procedures
December 2003
Survivable configuration
In a survivable configuration, the S8300 Media Server is configured as a Local Survivable Processor
(LSP). The LSP is present on the G700, but Communication Manager is not active, and runs in a special
survivable mode. The LSP provides service to a subset of endpoints in the event that the G700 cannot be
served by its primary Media Server.
Each S8300 configured as an LSP has its own License File that contains the serial number of the G700
into which the LSP is physically inserted. As soon as the LSP becomes active and begins providing
service as the Media Server, it invokes License-Error mode. The LSP can remain in License-Error mode
for a maximum of ten days. If the LSP is still acting as the active server after that time, it enters No-
License mode.
The Local Survivable Processor field in the OPTIONAL FEATURES section of the Customer Options
form indicates that the switch is an S8300 functioning in Local Survivable Processor mode. This field is
modified only through the License File and is “display only” on the Customer Options form.
License File modes
License files for the Avaya S8300 Media Server in an Avaya G700 Media Gateway function in the
following three modes:
License-Normal
This is the desired mode of operation for a stable switch. In this mode, a license is properly installed, the
license contains a serial number that matches the G700’s, the license is not expired, and the feature usage
does not exceed limits set in the license.
License-Error
This is a warning mode. In this mode, call processing is supported, a major alarm is declared, and a ten-
day timer begins. If this timer expires, No-License Mode is invoked.
Clear License-Error Mode by correcting the error that caused entry into License-Error Mode, or by
installing a valid license that is consistent with the configuration of the switch.
This is caused when:
• A survivable processor begins to provide service, which causes a major alarm
• The serial number in the License File does not match the serial number of the G700 into which the
S8300 is physically inserted
To resolve this problem:
• Check the networking
• Check the serial numbers