Avaya C360 Manager, Руководство по установке и настройке

Страница: 79 / 248

SNMP Support
Issue 2 July 2005 79
- AuthNoPriv
- AuthPriv
●
View names:
- Read - Allow read-only access to a specified list of Object IDs (OIDs) in the MIB tree.
- Write - Allow read-write access to a specified list of OIDs in the MIB tree.
- Notify - Allow SNMP notifications from a specified list of OIDs to be sent.
Views
Each view consists of a name and a list of OIDs in the MIB tree. This list can be created using
multiple "snmp-server view" commands to either add OIDs to the list or exclude OIDs from a list
of all of the OIDs in the switch's MIB tree.
You can use wildcards to include or exclude an entire branch of OIDs in the MIB tree, using an
asterisk instead of the specific node.
To create an SNMPv3 view, you must provide the following information:
●
ViewName - a string of up to 32 characters representing the name of the view.
●
ViewType - Indicates whether the specified OID is included or excluded from the view.
●
OIDs - A list of the OIDs accessible using the view.
SNMP Commands
The following SNMP commands are available.
Table 16: SNMP CLI Commands 1 of 3
In order to... Use the following command...
Enable SNMP access to the
device ip snmp
Disable SNMP access to the
device no ip snmp
Enable SNMPv1 access to the
device snmp-server community
Disable SNMPv1 access to the
device no snmp-server community
1 of 3