Avaya BSGX4e, Руководство по установке

Страница: 25 / 56

25 BSGX4e Business Gateway Installation Guide
NN47928-303 Release 01.01
Lease expires N/A
MAC Address 00:11:22:33:66:77
Speed FULL100
Configured Speed AUTONEG
Default Gateway Address
1. To check that the unit received the default gateway address, enter:
*ICAD*> show route table
The unit responds with a display similar to the following:
Destination Gateway Netmask Interface
-------------------------------------------------------------
0.0.0.0
66.206.164.193 0.0.0.0 eth0
195.206.164.1 195.216.164.1 255.255.255.224 eth0
127.0.0.1 127.0.0.1 255.0.0.0 lo0
192.168.1.0 192.168.1.1 255.255.255.0 eth1
2. Look at the route with the Destination 0.0.0.0 and Netmask 0.0.0.0. The
address shown under Gateway is the default gateway address. If the address is
correct, skip to the procedure DNS Server (page 25) .
3. If the address is incorrect or the table does not have a default route, enter the
correct default gateway address:
*ICAD*> config route table default gw address
4. To verify that the new default route is correct, enter the show command
again:
*ICAD*> show route table
DNS Server
1. To check that the unit has the address of a DNS server, enter:
*ICAD*> show system dns
The unit responds with a display similar to the following:
DNS Settings:
DNS1 192.168.134.160
DNS2 0.0.0.0
Domain wan.com
2. Look at the line DNS1 . The address on this line is that of the primary DNS
server. If the DNS settings are correct, go to
step 5.
3. If the address is incorrect or unspecified (0.0.0.0), enter the correct DNS
server address. You can also enter an optional domain name with the
command:
*ICAD*
>
config system dns dns1 address domain name